• Type: Log. resistive (for example, PDV-P5001 100ohm to 300K, match with 10Kohm resistor. Lower for brighter light, higher for dimmer light, experiment to get the best range!)
• Range: Visible light up to 10Lux
• Approx Cost: $2
• Distributors: Digikey Jameco Futurelec (and just about every other electronics supply store)
• Datasheet

Use this with the resistive sensor board.

• Type: Analog voltage out
• Range: From 32 °F to 212 °F (10mV/°F)
• Approx Cost: $2.50
• Distributor: Digikey Jameco Parallax
• Datasheet

Use this with the Analog/Digital Input & Output board, connected to an analog input configured as Analog Input.

If you set the calibration to min:0 and max: 261 the MIDI output data will be in degrees F

• Type:
• Range:
• Cost:
• Distributor: Futurlec